data sheet part number 855659 110.592 mhz saw filter subject to change or obsolescence without notice rev - 02/08 ? triquint semiconductor page 1 of 5 features for broadband applications usable bandwidth 1.0 mhz low loss single-ended operation ceramic surface mount package (smp) hermetic rohs compliant (2002/95/ec), pb -free package pin configuration surface mount 13.30 x 6.50 x 1.75 mm bottom view smp-53 12 11 10 9 8 7 6 5 4 3 2 1 single - ended configuration pin no. description 11 input 5 output 1,4,6,7,10,12 ground 2,3,8,9 case ground 1.75 nom. 1.96 max. 0.76 0.79 1.17 x 3.76 1.50 2.54 6.50 2.18 2.54 13.3 dimensions shown are nominal in millimeters all tolerances are 0.15mm except overall length and width 0.10mm body: al 2 o 3 ceramic lid: kovar , ni plated terminations: au plating 0.5 - 1.0m, over a 2 C 6m ni plating pb
data sheet part number 855659 110.592 mhz saw filter subject to change or obsolescence without notice rev - 02/08 ? triquint semiconductor page 2 of 5 electrical specifications (1) operating temperature range: (2) -40 to +85 c parameter (3) minimum typical (4) maximum unit center frequency - 110.592 - mhz insertion loss at 110.592 mhz 4.70 6.52 7.70 db 3 db bandwidth (5) - 0.79 1.0 mhz lower 30 db band edge (5) upper 30 db band edge (5) 109.292 - - - - 111.892 mhz mhz lower 40 db band edge (5) upper 40 db band edge (5) 108.192 - - - - 112.992 mhz mhz passband ripple 110.442 C 110.742 mhz - 0.25 0.6 db p-p group delay variation 110.392 C 110.792 mhz - 100 150 ns p-p triple transit suppression 32 38 - db source impedance (single-ended) (6) load impedance (single-ended) (6) - - 50 50 - - notes : 1. all specifications are based on the triquint tes t circuit shown below 2. in production, devices will be tested at room te mperature to a guardbanded specification to ensure electrical compliance over temperature 3. electrical margin has been built into the design to account for the variations due to temperature d rift and manufacturing tolerances 4. typical values are based on average measurements at room temperature 5. relative to insertion loss at center frequency 6. this is the optimum impedance in order to achiev e the performance shown test circuit: actual matching values may vary due to pcb layout a nd parasitics 50 w single-ended input 1,2,3,4,6 7,8,9,10,12 50 w ww w 22nh 56pf 11 5 50 w ww w 39pf 150nh 150nh 50 w single-ended output
data sheet part number 855659 110.592 mhz saw filter subject to change or obsolescence without notice rev - 02/08 ? triquint semiconductor page 3 of 5 typical performance (at room temperature)
data sheet part number 855659 110.592 mhz saw filter subject to change or obsolescence without notice rev - 02/08 ? triquint semiconductor page 4 of 5 matching schematics actual matching values may vary due to pcb layout a nd parasitics 50 w single-ended input 1,2,3,4,6 7,8,9,10,12 50 w ww w 22nh 56pf 11 5 50 w ww w 39pf 150nh 150nh 50 w single-ended output marking pcb footprint 3.53 6.70 1.88 .99 3.96 1.55 8.61 .99 1.70 1.70 13.51 the date code consists of: day of the current year (julian, 3 digits), last digit of the year (1 digit) and hou r (2 digits) this footprint represents a recommendation only dimensions shown are nominal in millimeters tape and reel a a 24 1.75 11.5 ?1.5 2.3 13.9 4.0 ?1.5 2.0 0.3 12.0 7.1 section a-a direction of travel ?330 24.8 2.7 ?102 ?13.0 ?20.2 2.0 id dot dimensions shown are nominal in millimeters packaging quantity: 2000 units/reel xxxxxx date code id dot sawtek 855659
data sheet part number 855659 110.592 mhz saw filter subject to change or obsolescence without notice rev - 02/08 ? triquint semiconductor page 5 of 5 maximum ratings parameter symbol minimum maximum unit operating temperature range t -40 +85 o c storage temperature range t stg -40 +85 o c important notes warnings electrostatic sensitive device (esd) avoid ultrasonic exposure rohs compliance this product complies with eu directive 2002/95/ec (rohs) solderability compatible with jesd22-b102, pb-free process, 260c peak reflow temperature ( see soldering profile ) links to additional technical information pcb layout tips qualification flowchart soldering profile s-parameters rohs information other technical information triquints liability is limited only to the surface acoustic wave (saw) component(s) described in this data sheet. triquint does not accept any liabilit y for applications, processes, circuits or assemblies , which are implemented using any triquint componen t described in this data sheet. contact information po box 609501 orlando, fl 32860-9501 usa phone: +1 (407) 886-8860 fax: +1 (407) 886-7061 email: info-product@tqs.com web: www.triquint.com or contact one of our worldwide network of sales offices, representatives or distributors pb
|
